Lindy 32530 User Manual

Page 31

Advertising
background image

Section 5 IP Access Configuration & Operation

60

Note:

The U8/16-IP has its own independent real time clock. Make sure the time setting of

the U8/16-IP switch is correct. (See the Section called Date and Time on page 63)

Enable Dynamic DNS

Enables the Dynamic DNS service. This requires a configured DNS server IP address.

Dynamic DNS server

This is the server name where the U8/16-IP registers itself in regular intervals. At the time of

writing, this is a fixed setting since only dyndns.org is currently supported.

Hostname

This is the hostname of the U8/16-IP that is provided by the Dynamic DNS Server. (Use the

whole name including the domain,

e.g. testserver.dyndns.org

not just the actual hostname).

Username

You have registered this username during your manual registration with the Dynamic DNS

Server. Spaces are not allowed in the nickname.

Password

The password used during manual registration with the Dynamic DNS Server.

Check time

The U8/16-IP registers itself in the Dynamic DNS server at this time.

Check interval

This is the interval for reporting again to the Dynamic DNS server by the U8/16-IP.

Section 5 IP Access Configuration & Operation

61

Security

Force HTTPS

If this option is enabled, access to the web front-end is only possible using an HTTPS

connection. The U8/16-IP will not listen on the HTTP port for incoming connections.

If you want to create your own SSL certificate that is used to identify the U8/16-IP please refer

to the section called Certificate on page 58.

KVM encryption

This option controls the encryption of the RFB protocol. RFB is used by the Remote Console to

transmit both the screen data to the administrator’s machine and the keyboard and mouse data

back to the host. If set to "Off" no encryption will be used. If set to "Try", the applet will attempt

to establish an encrypted connection. If connection establishment fails for any reason an

unencrypted connection will be used. If set to Force the applet tries to make an encrypted

connection. An error will be reported if connection establishment fails.

Advertising
This manual is related to the following products: