Lexmark E234 - Manual (Page 110)

Supplies information
110
5 I nstall the toner cartridge into the new print cartridge assembly by aligning the white rollers on
the toner cartridge with the white arrows on the tracks of the photoconductor kit and pushing
the toner cartridge in as far as it will go. The cartridge clicks into place when correctly
installed.
6 Install the print cartridge assembly into the printer by aligning the green arrows on the guides
of the print cartridge assembly with the green arrows on the tracks in the printer and pushing
the print cartridge assembly in as far as it will go.
7 Close the front cover.
Note: For information about resetting the photoconductor kit’s counter, refer to the
instruction sheet that shipped with the new kit.