Print quality problems, Abcde abcde abcde – Lexmark E234 User Manual
Page 114
Troubleshooting
114
Print quality problems
You can solve many print quality problems by replacing a supply or maintenance item that has
reached the end of its intended life. Use the following table to find solutions to print quality problems.
Symptom
Cause
Solution
White lines
• The printhead lens is dirty.
• Either the toner cartridge or the
fuser is defective.
Try the following in this order:
1 Clean the printhead lens.
(See
.)
2 Replace the toner cartridge.
3 Replace the fuser
*
.
Streaked horizontal lines
The toner cartridge or fuser may
be defective, empty, or worn.
Replace the toner cartridge or
fuser
*
as needed.
Streaked vertical lines
• Toner is smeared before fusing
to the paper.
• The toner cartridge is defective.
• If paper is stiff, try feeding from
another tray or the manual
feeder.
• Replace the toner cartridge.
Print irregularities
• Paper has absorbed moisture
due to high humidity.
• You are using paper that does
not meet the printer
specifications.
• The fuser is worn or defective.
• Load paper from a fresh
package in the paper tray.
• Avoid textured paper with rough
finishes.
• Make sure the printer driver
paper type setting matches the
type of paper you are using.
• Replace the fuser
*
.
*
To replace the fuser, call a service technician.
†
This setting can be changed using the Local Printer Setup Utility. See
“Using the Local Printer Settings
for more information.
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE