Printer energy consumption, Statement of limited warranty, Notices 9 – Lexmark E234 User Manual

Page 9

Advertising
background image

Notices

9

Printer energy consumption

The following table documents the power consumption
characteristics of the printer.

The power consumption levels listed in the previous table represent
time-averaged measurements. Instantaneous power draws may be
substantially higher than the average.

Power Saver

As part of the ENERGY STAR program, this printer is designed with
an energy-saving mode called Power Saver. The Power Saver
Mode is equivalent to the EPA Sleep Mode. The Power Saver Mode
saves energy by lowering power consumption during extended
periods of inactivity. The Power Saver Mode is automatically
engaged after this printer is not used for a specified period of time,
called the Power Saver Timeout. The factory default Power Saver
Timeout is 30 minutes for the Lexmark E234 and Lexmark E234n.
By using the printer configuration menus, the Power Saver Timeout
can be modified between 1 minute and 240 minutes. Setting the
Power Saver Timeout to a low value reduces energy consumption,
but may increase the response time of the printer. Setting the Power
Saver Timeout to a high value maintains a fast response, but uses
more energy.
If the Power Saver Mode is affecting the effective use of this printer,
this mode can be disabled from the Local Printer Setup Utility (see
page 99) or, if you have a network model, from the printer’s resident
Web page (see page 98).

Total energy usage

It is sometimes helpful to calculate the total printer energy usage.
Since power consumption claims are provided in power units of
Watts, the power consumption should be multiplied by the time the
printer spends in each mode in order to calculate energy usage.
The total printer energy usage is the sum of each mode's energy
usage.

Statement of Limited Warranty

Lexmark International, Inc., Lexington, KY

This warranty applies to the United States and Canada. For
customers outside the U.S. and Canada, refer to the
country-specific warranty information that came with your printer.

Lexmark E234, E234n

This Statement of Limited Warranty applies to this product if it was
originally purchased for your use, and not for resale, from Lexmark
or a Lexmark remarketer, referred to in this statement as
“Remarketer.”

Warranty

Lexmark warrants that this product:

Is manufactured from new parts, or new and serviceable
used parts, which perform like new parts

Is free from defects in material and workmanship

Conforms to Lexmark’s official published specifications

Is in good working order

If this product does not function as warranted during the warranty
period, contact a Remarketer or Lexmark for repair without charge.
If this product is a feature or option, this statement applies only
when that feature or option is used with the product for which it was
designed. To obtain warranty service, you may be required to
present the feature or option with the product.
If you transfer this product to another user, warranty service under
the terms of this statement is available to that user for the
remainder of the warranty period. You should transfer proof of
original purchase and this statement to that user.

Warranty service

The warranty period is 12 months and starts on the date of original
purchase as shown on the purchase receipt.
To obtain warranty service you may be required to present proof of
original purchase. Warranty service will be provided at a
Remarketer or a Lexmark designated location. You may be required
to deliver your product to the Remarketer or Lexmark, or ship it
prepaid and suitably packaged to a Lexmark designated location.
You are responsible for loss of, or damage to, a product in transit to
the Remarketer or the designated location.
When warranty service involves the exchange of a product or part,
the item replaced becomes the property of the Remarketer or
Lexmark. The replacement may be a new or repaired item. The
replacement item assumes the remaining warranty period of the
original product.
Replacement is not available to you if the product you present for
exchange is defaced, altered, in need of a repair not included in
warranty service, or damaged beyond repair. Also, such product
must be free of any legal obligation or restrictions that prevent its
exchange.
Before you present this product for warranty service, remove all
programs, data, and removable storage media.

Mode

Description

Power consumption

(by Machine Type)

4505-400

Printing

Printer is generating
hard copy output

420 W

Ready

Printer is waiting for a
print job

80 W

Power
Saver

Printer is in energy
saving mode

7 W

Off

Printer is plugged into a
wall outlet, but switch is
turned off

0 W

Advertising