Lexmark E234 - Manual (Page 57)

Using the operator panel
57
Flushing / Resolution reduced
Not ready
Light sequence:
• Ready—Blink
• Error—Blink
What this light sequence means:
• The printer is flushing corrupted print data.
• The printer is processing data or printing pages, but the
resolution of a page in the current print job is reduced from
600 dots per inch (dpi) to 300 dpi to prevent a memory full
error.
What you can do:
• Wait until the operator panel returns to Ready to print other
jobs.
• Press and release Cancel to cancel the print job.
• Press and hold Cancel to reset the printer.
Light sequence:
• Continue—On
What this light sequence means:
The printer is not ready to receive or process data, or the printer
ports are offline.
What you can do:
• Press Continue to return to the Ready or Busy state.
• Press and release Cancel to cancel the print job.
• Press and hold Cancel to reset the printer.