Lexmark E234 - Manual (Page 54)

Using the operator panel
54
Operator panel codes
Below are explanations of what the primary light sequences, or codes, and secondary error codes
mean and what you can do to clear them.
Primary codes
Ready / Power Saver
Light sequence:
• Ready—On
What this light sequence means:
• The printer is ready to receive and process data.
• The printer is in Power Saver mode.
What you can do:
• Send a print job.
• Press Continue to print the menu settings pages for a
list of current printer settings.
• Press and hold Cancel to reset the printer.
Note: If you want to change the Power Saver setting, it
can only be set from the Local Printer Setup Utility
(see
“Using the Local Printer Settings Utility”
on page 99 ).