Tips on storing print media and supplies, Card stock, Storing paper storing supplies – Lexmark E234 User Manual
Page 18: Storing paper, Storing supplies
Print media tasks and tips
18
Card stock
•
Preprinting, perforation, and creasing can significantly affect the print quality and cause
media handling or jamming problems.
•
Avoid using card stock that may release hazardous emissions when heated.
•
Do not use preprinted card stock manufactured with chemicals that may contaminate the
printer. Preprinting introduces semi-liquid and volatile components into the printer.
•
Use card stock with a maximum weight of 163 g/m
2
and a minimum size of 76 x 127 mm
(3 x 5 in.).
Tips on storing print media and supplies
Storing paper
Use the following guidelines to avoid paper feeding problems and uneven print quality.
•
Store paper in an environment where the temperature is approximately 21°C (70°F) and the
relative humidity is 40%.
•
Store cartons of paper on a pallet or shelf rather than directly on the floor.
•
If you store individual packages of paper out of the original carton, make sure they rest on a
flat surface so the edges do not buckle, curl, or become damaged.
•
Do not place anything on top of paper packages.
Storing supplies
Choose a cool, clean storage area for your printer supplies. Store supplies right side up in their
original packaging until you are ready to use them.
Do not expose supplies to:
•
Direct sunlight
•
Temperatures above 35°C (95°F)
•
High humidity (above 80%)
•
Salty air
•
Corrosive gases
•
Heavy dust