Lava Computer PAYLINK IP/232 - Manual (Page 11)

10
Data bits
Parity
Stop bits
Flow control
Terminal ID
This parameter can be set from 5 to 8. By default this parameter is
set to 8 bits.
This parameter can be set even, odd, none, mark, or space. By
default this parameter is set to none.
This parameter can be set 1, 1.5, or 2. By default this parameter is
set to 1.
This parameter can be set XON/XOFF, hardware, or none. By default
this parameter is set to none.
This parameter gives an identifying name, if needed, that a remote
server will identify with the serial port.