Lava Computer PAYLINK IP/232 - Manual (Page 4)

3
3. Open a web browser to the IP address of the PayLink-IP and
configure the device as described in the "Configuration"
section of this manual.
4. After configuring the LAVA PayLink-IP/232, attach it to your
network and connect a payment terminal to its serial port.
Serial port activity is indicated by two status LEDs per port. The
yellow LED lights when the serial port is transmitting data. The
green LED lights when the serial port is receiving data.
Single Port PayLink-IP/232
Serial connector
Serial Tx
indicator
Serial Rx
indicator