Lava Computer PAYLINK IP/232 - Manual (Page 9)

8
“DHCP enabled” checkbox has been set. The
will then act as a DHCP client and obtain its IP address from the
DHCP server on its LAN that first leases an IP address to the
.
Use this dialog box to change the TCP port number assigned to the
serial port of the
. By default the
assigns TCP port 2300 to its serial port; if another device on
the network is already using this TCP port number, reassign the
serial port to another TCP address.
After making changes to the network settings, four options exist:
This option will register the changes you have entered into the
dialog box and reboot the
, implementing the
changes on reboot.
This option will restore factory defaults and reboot the
, implementing the changes on reboot.
This option will discard changes entered into the dialog box and
return you to the “Administrator Menu” screen.
This option will reboot the device with the settings currently
implemented, and discard changes entered into the dialog box and
not submitted.
Assigned local TCP port
Submit changes and reboot device
Restore factory defaults and reboot device
Exit without changes
Reboot device
LAVA PayLink-IP/232
LAVA
PayLink-IP/232
LAVA PayLink-IP/232 LAVA PayLink-
IP/232
LAVA PayLink-IP/232
LAVA
PayLink-IP/232