Lava Computer PAYLINK IP/232 - Manual (Page 3)

Hardware Setup
2
1. Connect the power supply to the and to
AC power. The power (red) LED will light to indicate that the
unit is receiving power.
2. Connect to the Ethernet RJ-45 jack
of the . Attach the other end of the
crossover network cable to a host PC directly.
Network status is indicated by two LEDs on the RJ-45 connector.
The left (yellow) LED indicates network activity. It is on by default,
turning off when network activity occurs at the PayLink-IP. The right
(green) LED indicates a network link. It is off by default, but lights
when a network link exists.
LAVA PayLink-IP/232
an Ethernet cross-over cable
LAVA PayLink-IP/232
Power
connector
Power
indicator
Network
connector (RJ-45)
Network
Activity and Link
indicators