Lava Computer PAYLINK IP/232 - Manual (Page 7)

6
If not using a DHCP server to assign network addresses, choose the
"Manually configure" option for Network Settings. In the
configuration screen that appears, enter the network settings you
wish for that PayLink-IP. Once the new values are entered and
accepted, the PayLink-IP will reboot to implement the new network
settings. Advanced network settings can also be accessed from this
page by clicking on the "Advanced" link.
Changing the network settings of a PayLink-IP device that is
installed on a network may make that device unavailable to other
stations that have activated a connection to that device using older
network settings.
NOTE:
The following network parameters can be configured for the LAVA
PayLink-IP/232:
Network Settings