Lava Computer PAYLINK IP/232 - Manual (Page 5)

4
Configuration consists of the following:
B. Port configuration
C. Host configuration
D. Terminal Side Data and Protocol configuration
E. Password selection
F. Upgrading software
A. Configuring network settings
Configuration
A. Configuring network settings
PayLink-IP devices installed on your network will need unique IP
addresses. These are set by using a web browser.
The factory default network settings for the PayLink-IP are:
IP address: 192.168.0.35
Subnet mask: 255.255.255.0
Gateway address: 0.0.0.0
Name:
[empty]
Workgroup: [empty]
DHCP detection: disabled
To set a PayLink-IP's network settings, open a web browser and
enter the IP address of the PayLink-IP into the browser's location
bar. The embedded web server running on the PayLink-IP will
display the opening screen of the PayLink-IP.
Configuring PayLink-IP network settings