Linksys SFE2010 - Manual (Page 22)

SFE2010/SFE2010P Administration Guide 19
System Configuration
Using the Console
To change the system contact, system name, and location:
1. Select Edit, and then make your changes. Press the Tab key to move the cursor from one
field to the next.
2. Press the Esc key to return to the Action list.
3. Select Save to save your changes.
4. When the Operation complete message appears, press the Esc key to move the cursor to the
Action list.
Management Settings
The Management Settings screen provides access to screens where you can change the settings
for serial port, telnet, and secure telnet (SSH).
1. Serial Port Configuration (see page 20)
2. Telnet Configuration (see page 20)
3. SSH Configuration (see page 21)
0.Back (Select to return to the previous menu.)
To open this screen:
1. From the Switch Main Menu, select 1. System Configuration Menu.
2. From the System Configuration Menu, select 2. Management Settings.