Linksys SFE2010 - Manual (Page 34)

SFE2010/SFE2010P Administration Guide 31
System Configuration
Using the Console
4. From the IPv4 Address Configuration menu, select 1. IPv4 Address Settings.
To edit the IPv4 address settings:
1. Select Edit., and then make the changes. Press the Tab key to move the cursor from one
field to the next.
NOTE: To enable or disable the DHCP client, move the cursor to the field, and then press the
Space Bar to toggle between ENABLE and DISABLE.
2. Press the Esc key to move the cursor to the Action list.
3. Select Save to save your settings
4. When the Operation complete message appears, press the Esc key to move the cursor to the
Action list.
DHCP Renew
You can select this option to renew DHCP.
NOTE: This option is available only if the interface is configured as a DHCP interface, through
IPv4 Address Settings.
To renew DHCP:
1. From the Switch Main Menu, select 1. System Configuration.
2. From the System Configuration Menu, select 6. IP Configuration.
3. From the IP Configuration menu, select 1. IPv4 Address Configuration.
4. From the IPv4 Address Configuration menu, select 2. DHCP Renew. The Operation Complete
message appears.
IPv6 Address Configuration
The IPv6 Configuration menu provides access to screens where you can manage the settings for
IPv6 and ISATAP.