Linksys SFE2010 - Manual (Page 50)

SFE2010/SFE2010P Administration Guide 47
Port Status
Using the Console
Stack Configuration
You can use the Stack Configuration screen to specify the Stack ID for the Ethernet switch. By
default, ID numbers are automatically assigned to each device.
To open this screen:
1. From the Switch Main Menu, select 1. System Configuration.
2. From the System Configuration Menu, select 11. Stack Configuration.
Port Status
The Port Status menu provides access to screens where you can view the port status and the
PoE status for each port on the switch.
1. Port Status (see page 48)
2. PoE Status (see page 48)
0.Back (Select to return to the previous screen.)
To open this screen:
From the Switch Main Menu, press 2. Port Status.