Linksys SFE2010 - Manual (Page 23)

SFE2010/SFE2010P Administration Guide 20
System Configuration
Using the Console
Serial Port Configuration
Use the Serial Port Configuration screen to view or change the baud rate of the Ethernet switch.
To open this screen:
1. From the Switch Main Menu, select 1. System Configuration Menu.
2. From the System Configuration Menu, select 2. Management Settings.
3. From the Management Settings Menu, choose 1. Serial Port Configuration.
To change the baud rate of the serial port:
1. Select Edit, and then make changes.
2. Press the Esc key to move the cursor to the Action list.
3. Select Save to save your changes.
4. When the Operation complete message appears, press the Esc key to move the cursor to the
Action list.
Telnet Configuration
Use the Telnet Configuration screen to view or change the time-out settings.