Linksys SFE2010 - Manual (Page 63)

SFE2010/SFE2010P Administration Guide 60
E
Specifications
Model • SFE2010 48-port 10/100 Ethernet Switch
• SFE2010P 48-port 10/ 100 Ethernet Switch with PoE
• IEEE 802.3af PoE on delivered over any of the 48 10/100 ports
• Power budget allows for max power of 15.4W to a FE port, with 360W
available to all FE ports on regular AC, and 280W available on redundant
power supply
Ports 48 RJ-45 connectors for 10BASE-T/100BASE-TX + 2 10BASE-T/100BASE-TX/
1000Base-T + 2 mini-GBIC ports
Console port
Auto MDI/MDI-X
Autonegotiate/Manual setting
RPS port for connecting to Redundant Power Supply unit
Cabling Type UTP CAT 5 or better for 10BASE-T/100BASE-TX, UTP CAT 5e or better for 1000BASE-
T
Switching Capacity 17.6 Gig non-blocking
Forwarding Capacity 13M packets per second (64-byte packet)
LEDs Power, Fan, Link/Act, PoE, Speed, RPS, Master, Stack ID 1 - 8
Stack Operation • Up to 192 ports in a stack
• Hot Insertion and removal
• Ring and Chain stacking options
• Master and Backup master for resilient stack control
• Auto-numbering or manual configuration of units in stack
Buttons Reset Button
Layer 2 options 8K
256 active VLANs (4096 range)
Port-based and 802.1Q Tag-based VLANs
Protocol-based VLAN
Management VLAN
Multicast TV VLAN
Private VLAN Edge (PVE)
GVRP
Head of line blocking prevention
Layer 3 options Static Routing
CIDR (Classless Interdomain Routing)
60 Static Routes
IPv4 and IPv6
Forwarding in silicon - Wirespeed forwarding of layer 3 traffic