Lfc 3000 users manual series a, Important safety instructions – Lincoln LFC 3000 User Manual
Page 2
Page Number - 2
LFC 3000 Users Manual
Series A
Form 403082
IMPORTANT SAFETY INSTRUCTIONS.
1. Before installing or using this product, please read the
instruction manual thoroughly.
2. Unpacking: Please check that the product is complete
and free from any damage
3. Only qualified individual should install and/or repair this
product.
4. Unplug the LFC3000 from the electrical outlet before you
clean it.
Use a damp cloth for cleaning and do not use liquid or
aerosol cleaners.
5. Do not place the LFC3000 on an unstable surface that
may allow the unit to fall.
6. Never place the LFC3000 near or over a radiator or heat
register.
7. Use the type of power source indicated on the label (AC
power). If you are not sure of the type of power available,
consult your supplier or local electric company.
8. The LFC3000 must be equipped with a plug having a
third (grounding) pin, which fits only into a grounding-
type outlet. This is a safety feature. LFC3000 should not
be used without a properly grounded outlet. Failure to
properly ground the LFC3000 may cause damage to the
unit or the data stored.
9. Do not put the LFC3000 where the cord will be walked
on.
10. An extension cord is not recommended for use with the
LFC3000.
If you use an extension cord, make sure that the total of
the ampere ratings on the products plugged into the
extension cord does not exceed the extension cords
ampere rating. Also make sure that the total of all
products plugged into the wall outlet does not exceed
15 amperes.
11. Unplug the LFC3000 from the wall outlet and have it
repaired by a qualified service person under the
following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into it.
C. If it has been exposed to rain or water.
D. If it does not operate normally when the operating
instructions are followed. Adjust only those controls that
are covered by the operating instructions since improper
adjustment of other controls may result in damage and
lose of data.
E. If it has been dropped or damaged.
If it exhibits a distinct change in performance, indicating
a need for service.
Table of Contents
Safety Instructions..........................................................................2
Description......................................................................................3
Memory Protected..........................................................................3
Technical Data................................................................................4
User Menu.......................................................................................4
Supervisor Menu............................................................................4
Customer Menu..............................................................................6
System Menu..................................................................................8
Transaction Codes......................................................................11
Flow Chart for Screens................................................................12
Failure to adhere to these safety instructions may result
in serious bodily injury or death.