Lincoln LFC 3000 - Manual (Page 4)

Page Number - 4
LFC 3000 User’s Manual
Series “A”
Form 403082
Enter Hose
_ 0
Enter the hose’s number, which corresponds to your request.
Press ENTER
Product
(Product’s name)
The system confirms the product’s name dispensed on the
selected hose. Press ENTER
Enter quantity
6.7
(Optional – Dispense mode: Pre-select or Free dispense)
Enter the desired quantity. Press ENTER
Dispense product
SUPERVISOR MENU
The Supervisor menu is accessible through all the keypads
by entering the Supervisor PIN Number. Every 45 seconds
without use of the keypad, the display shows you the date &
time and resets the network. The factory PIN number for the
supervisor menu is 9999.
Enter Pin No.
9999
Good Morning
Supervisor
Supervisor Menu
Start / Stop
The selection Start/Stop allows the supervisor to restart the
system. ENTER
System State
Active
ENTER
Supervisor Menu
Transaction Report
Upon request, the supervisor can print the transaction’s
reports. These reports will give him precise history of fluids
dispensed and totals. All the reports are printed on the
report printer as configured in the system configuration
menu.
TECHNICAL DATA
Network specifications
The LFC 3000 operates with a CAN Bus network that uses two
wires and a shield.
System specifications
Keypads on a system 64 max.
I/O modules on a system 8 max.
Solenoid valves on a system 64 max.
Meters with single channel pulse transmitters 64 max.
Fluids on a system 8 max.
Number of operators 99 max.
Transaction log 1900 max.
Simultaneous dispenses 64 max.
Printers per system 64 max.
Power supply
The LFC 3000 operates on a 24 VDC voltage.
A power supply unit is included in the system - Voltage Input
90-120 Volts AC, 50/60 Hz single phase.
Default PIN Numbers
The factory PIN numbers are as follows:
Supervisor Menu......................................................................9999
Customer Menu........................................................................1111
System Menu...........................................................................2222
USER MENU
The user menu is accessible through all the keypads. Only
the personal PIN code gives
access to this menu.
Enter Pin No.
****
Good Morning
(User’s name)
Enter Job No.
.
Enter the number of the job, Press ENTER
Enter Reg. No.
.
(Optional)
Enter the vehicle plate number (Alphanumerical), Press
ENTER
Enter Reg. No.
.
(Optional)
Enter the vehicle mileage. Press ENTER