Lincoln LFC 3000 - Manual (Page 5)

Page Number - 5 Form 403082
LFC 3000 User’s Manual
Series “A”
sor PIN Number has been forgotten, it will be necessary to
reset the system. See Instruction Manual under Trouble-
shooting, “Lost Supervisor PIN.”
ENTER
Supervisor pin
9999
ENTER
Supervisor Menu
Set super PIN
ENTER
Confirm PIN
****
ENTER
Confirm PIN
Confirmed
ENTER
Supervisor Menu
Clear transactions
ENTER
We advise you to clear regularly the transactions when you
use the system without PC: the transaction’s number is limit-
ed to 1900. Moreover, when you print the report, you will have
the printing of all the transactions since the last “Clear trans-
actions.” Answering “Yes” will automatically clear all transac-
tions in the memory of the system. To avoid clearing transac-
tions by mistake, the system is proposing a “No” answer.
Using the down arrow will bring the “Yes” answer on the
screen.
ENTER
Clear Transactions
No
Down
ENTER
Are you sure?
No
Down
ENTER
Suggestion: print your transaction reports before clearing
transactions.
Transaction reports are available:
By user Report by user (Enter the user’s number)
By hose Report by hose (Enter the hose’s number)
By product Report by product (Enter the product’s
number)
All trans-
actions All Reports
Exit
Supervisor Menu
Delivery Rep.
LFC 3000 prints a hard copy of all your stock modifications.
We recommend you to print this report after each product
delivery entered in the system.
Supervisor Menu
Stock Level Rep.
Prints the stock and the minimum levels for all the config-
ured tanks.
Supervisor Menu
Product Delivery
Enter here your new oil deliveries. The new stock will be
calculated automatically. Suggestion: Print a delivery report
after entering deliveries.
Use Up / Down key to select the desired tank. ENTER
Supervisor Menu
New Stock Level
If you want to modify the stock level:
ENTER
New Stock Level
Tank 1 = 200
New Stock Level
300 lts
Supervisor Menu
Set Date / Time
ENTER
Date 17-05-02
Time 15:09
In a multi I/O system, this parameter must be the same on
each I/O. Every 45 seconds without use of the keypad, the
display shows you the date & time and reset the network.
Supervisor Menu
Set super PIN
This prompt is used to change the Supervisor PIN Number.
Only numerical PIN is accepted by the system. If the supervi-