Linksys 10/100 - Manual (Page 15)

EtherFast 10/100 PrintServers
4. When the Properties window with the name of your printer appears, click
on Ports and then Add Port.
5. The Printer Ports window appears listing Available Printer Ports.
Select PrintServer and click on New Port.
6. Click on Browse to search for your PrintServer.
25
Instant EtherFast ® Series
24
Installing the NT Printer Driver
1. Click on Start, Settings, and Printers.
2. Install the printer driver per the directions from the printer’s manufacturer,
if you haven’t already.
3. After the printer driver is installed, click on the printer to be configured,
then right-click to select Properties.