Linksys 10/100 - Manual (Page 16)

EtherFast 10/100 PrintServers
27
Instant EtherFast ® Series
7. When your PrintServer is found, the Device Select window appears, as
shown below. Select the PrintServer you want to configure and click
OK.
8. Enter the Default Name on page10 for your PrintServer in the Device
Name field. You may opt to rename your port, keeping all of your
PrintServer port names unique. Click Select Device Port and select the
port on the PrintServer you are setting up. Click OK.
26
9. A Output Select window appears. Select the port that your printer is
attached to and click OK. Click OK again when the Configure
PrintServer window appears.
10. When the Printer Ports window appears again, click Close.
11. The Properties window with the name of your printer should reappear
with the new port added to the list. Click OK to confirm your new set-
tings.