Linksys 10/100 - Manual (Page 22)

EtherFast 10/100 PrintServers
39
Instant EtherFast ® Series
38
Using Bi-Admin
Obtaining Device Information:
The Device Information Icon
To access information about your PrintServer, either click on it in the Device
List window (on the right side of the Bi-Admin window) or highlight the
PrintServer and click on the Device Information icon, shown above. You can
also highlight the PrintServer and then click on Status to select Device
Information. The Bi-Admin program displays the PrintServer’s information in
a read-only window, and gives you the following information:
Hardware ID: 0620103428
Firmware Version: 6010
Protocol ID: 003F
Default Name: SCE02282
Server Name: RHINO
NetWare Info:
Master File Server:
NDS Tree Name:
NDS Tree Context:
Print Server Mode Status:
Remote Printer Mode Status: N/A
AppleTalk Info:
Printer Type:
SCE02282:LaserWriter
TCP/IP Info:
IP Address: 192.168.1.38
Gateway Address: 192.168.2.254
Subnet Mask: 255.255.255.1
Email Server IP Address: 0.0.0.0
Printing Account Name: N/A
Redirect Account Name: N/A
You can save this information to a text file by clicking Save to Text in the
Device Information window and giving Bi-Admin the location to which the
file should be saved.
Starting the Bi-Admin Management Utility
1. To start the Bi-Admin program, click on Start, Programs, Linksys
PrintServer Admin, and then PrintServer Bi-Admin. If the Bi-Admin
icon has been created, you can just double-click on it instead. You can
drag the shortcut icon onto your Desktop for easy access to the Bi-Admin
program.
2. When the Bi-Admin program appears, it will automatically scan the net-
work for available Linksys PrintServer hardware. Any hardware found on
the network will appear in the Default Name, Device Name, Printer Port
chart. Default Name is the SC number located on the back or bottom of
the PrintServer unit, and cannot be changed.
3. When the program is executed, it will ask for a password. Otherwise,
enter the password if you have assigned one and click OK. You will be
asked for the password every time you change the settings or protocols.
“Device name” is a nickname that you can give the PrintServer to make it
more user-friendly for users on the network. It can be changed with Bi-
Admin by clicking on Configuration, then System.
“Printer Port” displays the number of printer ports on the PrintServer.
Go to page 39 for instructions on using the Bi-Admin utility.
Bi-Admin Help Files
The Help files for the Bi-Admin program can be accessed by clicking on
Help in the Menu bar. These help files offer extensive advice and details
about all of your PrintServer’s functions and capabilities.
N No otte e:: Sometimes the PrintServer's E Errrro orr or S Stta attu us s LED may light up or flick-
er as it accepts your configuration changes, which is normal.