LG HX301G User Manual

Page 5

Advertising
background image

Safety Instructions

5

Using

WARNING

If water is spilt into the projector unplug it from the power supply

immediately and consult your Service Agent.

This may cause an electric shock hazard or damage to the unit!

Dispose of used batteries

carefully and safely.

In the case of a battery being

swallowed by a child please consult

a doctor immediately.

CAUTION concerning the Power Cord

It is recommend that most appliances be placed on a dedicated circuit; that is, a single outlet circuit

which powers only that appliance and has no additional outlets or branch circuits.Check the specification

page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,

frayed power cords, or damaged or cracked wire insulation are dangerous.Any of these conditions could

result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance

indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord

replaced with an exact replacement part by authorized service personnel.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,

closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the

cord exits the appliance.

Do not remove any covers. High

risk of Electric Shock!

Don’t look directly into the lens

when the projector is in use. Eye

damage may occur!

Do not touch metal parts during

or soon after operation since the

vents will remain very hot!

Power

WARNING

Power

NOTES

Do not plug-in too many items

into one power outlet.

It may result in overheating of the out-

let and create a fire hazard!

Never touch the power plug with

a wet hand.

This may cause an electric shock

hazard!

Prevent dust from collecting on

the power plug pins or outlet.

This may cause a fire hazard!

Hold the plug firmly when

unplugging. If you pull the cord,

it may be damaged.

This may cause a fire hazard!

Do not use if the power cord or

the plug is damaged or any part

of the power outlet is loose.

This may cause a fire or an electric

shock hazard or damage to the unit!

Ensure the power cord does not

come into contact with sharp or

hot objects.

This may cause a fire or an electric

shock hazard or damage to the unit!

Place the projector where people

will not trip or tread on the power

cord.

This may cause a fire or an electric

shock hazard or damage to the unit!

Do not turn the projector On/Off by plugging-in or unplugging the

power plug to the wall outlet.

(Allow the unit to cool before removing power.)

It may cause mechanical failure or could cause an electric shock.

Do not place anything containing

liquid on top of the projector

such as flowerpot, cup, cosmet-

ics or candle.

This may cause a fire hazard or

damage to the unit!

In case of impact shock or damage

to the projector switch it off and

unplug it from the power outlet and

contact an authorized service center.

This may cause a fire or an electric shock

hazard or damage to the unit!

Do not allow any objects to fall

into the projector.

This may cause an electric shock haz-

ard or damage to the unit!

Advertising
This manual is related to the following products: