Life Fitness G4 User Manual
Page 13
12
S
TEP
9:
•
Assemble the LEG PEDESTAL (K) to the FRAME (A) using two RH CAPS (32), one 1/2 X 104mm BOLT (2), two
3/8” SHIM WASHERS (13), and one 1/2” LOCK NUT (20). (Note: Tighten this connection enough to remove
excess play yet allow the LEG PEDESTAL to rotate freely.)
•
Assemble two ROLLER PADS (AJ) to the LEG PEDESTAL (K) using one 3/4 X 17-7/8” TUBE (T), and four PLASTIC
WASHERS (33).
•
Assemble two ROLLER PAD CAPS (30) using two 5/16” X 1” ALLEN SCREWS (38) as shown in FIGURE 9.
18
F
IGURE
8
S
TEP
8:
• SECURELY assemble the PEC PLATE (O) to the BASE (B) using two 3/8 X 2-3/4” BOLTS (9), one 3/8 X 4” BOLT
(5), two 3/8” WASHERS (18) and three 3/8” SILVER LOCK NUTS (19) as shown in FIGURE 8.
•
SECURELY assemble the LEFT (F) and RIGHT (G) PEC FLY ARMS to the BASE (B) using two 1/2 X 3/4” BUTTON
HEAD BOLTS (15) as shown in FIGURE 8. (Note: Tighten this connection enough to remove excess play yet
allow the PEC FLY ARMS freely.)
F
IGURE
9