Life Fitness G4 - Manual (Page 19)

S
TEP
16:
• Route the LAT CABLE (AM) through the PRESS ARM SUPPORT FRAME (X) and assemble one
3-1/2” PULLEY (35) to the FRAME PRESS ARM SUPPORT FRAME (X) using one 3/8 X 8” BOLT
(3), two 3/8” WASHERS (18), two 3/8 X 1-1/4” SPACERS (25) and one 3/8” SILVER LOCK NUT
(19). See FIGURE 16.
• Route the LAT CABLE (AM) through the FRAME (A) and assemble one 3-1/2” PULLEY (35) to
the FRAME (A) using one 3/8 X 3-3/4” BOLT (6), two 3/8 X 1-1/16” FLANGE SPACERS (26) and
one 3/8” SILVER LOCK NUT (19). See FIGURE 16.
• Route the LAT CABLE (AM) around one 3-1/2” PULLEY (35) and assemble the PULLEY to the
DOUBLE FLOATING PULLEY BRACKET ASSEMBLY (AA) using one 3/8 X 1-3/4” BOLT (11) and
one 3/8” SILVER LOCK NUT (19). See FIGURE 16.
NOTE: Make sure the cable runs in the grooves of the pulleys.
18
F
IGURE
16
0 1 2 3 4 5 6
1/2 1/2 1/2 1/2 1/2 1/2