Life Fitness G4 - Manual (Page 23)

S
TEP
20:
• Route the large ball end of the LOW CABLE (AN) around one V- PULLEY (37) and assemble the
PULLEY to the FRAME (A) using two 3/8 X 3-3/4” BOLTS (6), two 1/2” FLANGE SPACERS (28),
two 3/8” WASHERS (18) and two 3/8” SILVER LOCK NUTS (19) as shown in FIGURE 20.
• Route the small ball end of the LOW CABLE (AN) through the BASE PLATES (C) and assemble
two 3-1/2” PULLEYS (35) to the BASE PLATES (C) using two 3/8 X 3-3/4” BOLTS (6), four 1”
SPACERS (24) and two 3/8” SILVER LOCK NUTS (19). See FIGURE 20.
22
28
18
3/8 X 3-3/4” 6
6 3/8 X 3-3/4”
19
35
24
C
19
A
37
AN
F IGURE 20