Life Fitness G4 - Manual (Page 24)

S
TEP
21:
• Route the LOW CABLE (AN) around one 3-1/2” PULLEY (35) and assemble the PULLEY to the
PULLEY BRACKET (Z) using one 3/8 X 1-3/4” BOLT (11) and one 3/8” SILVER LOCK NUT (19)
as shown in FIGURE 21.
• Route the LOW CABLE (AN) through the BASE PLATES (C) and assemble one 3-1/2” PULLEY
(35) to the BASE PLATES (C) using one 3/8 X 3-3/4” BOLT (6), two 1” SPACERS (24) and one
3/8” SILVER LOCK NUT (19). See FIGURE 21.
23
3/8 X 1-3/4” 11
6 3/8 X 3-3/4”
7
19
24
35
19
35
C
AN
F
IGURE
21