Vhs]]^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ), Before use, Video cassettes ≥video cassette care ≥maintenance – Panasonic DIGA DMR-E75V User Manual

Page 50: Setting up, Fine tuning, L 50), L 50, Setting up ∫ fine tuning, Insert a video cassette, 1] press [enter] for 5 seconds or more

Advertising
background image

50

[[VHS]]

Before Use

Facing up the surface from which you can see a roll of tape,

Insert a video cassette

≥This unit automatically is turned on.

To eject a video cassette

For main unit.
≥Press [<, EJECT] on the main unit.
For remote control.
≥Press [VHS] and then press and hold [∫, STOP] for about 3 or more seconds.

≥Break out the video cassette’s tab to prevent accidental erasure. Cover the hole with a double layer of

adhesive tape when you want to use the video cassette for recording again.

≥You can use video cassettes with the VHS and S-VHS marks, but this unit is unable to make full use of the

characteristics of S-VHS video cassettes.

≥Poor quality or damaged video cassettes can cause the heads to become dirty and malfunction. Store your video cassettes carefully and

discard when they become dirty or damaged.

≥Never use video cassettes on which juice has been split or those that are extremely damaged since this will not only cause the heads to

become dirty, but will also make the unit malfunction.

Cleaning the video heads
Dirt on the video heads can cause poor recording and play.

Use an optional head-cleaning cassette (part number NV-TCL30PT). If the problem persists, seek advice from a qualified service person.

The tuning on DVD is automatically applied to the one on VHS. Therefore, tuning on VHS is not required.
When only the video output on VHS does not look natural, use the Fine Tuning function on VHS as below.

You can finely tune the reception on VHS regardless of the reception
on DVD.

[1]

Press [ENTER]
for 5 seconds or
more.

≥Tuning screen

appears.

[2]

Press [

3, 4, 2, 1] to

select the desired channel
name, and then press
[ENTER].

≥Fine Tuning screen appears.

[3]

Press [

2, 1] to obtain the best tuning

condition.

≥Press [ENTER] to select “AUTO”.

[4]

Press [RETURN] to start the new condition.

≥To continue Fine Tuning:

Repeat steps 2, 3, and 4.

[5]

Press [RETURN] to exit the tuning display.

Note
≥When you wish to set the item other than Fine Tuning, set it on

DVD. (

l 46)

≥When you set or change the Tuning menu in Setup menu on DVD,

the settings on the Fine Tuning is restored to the default.

Inserting video cassette

Video cassette information

Video cassettes

Video cassette care

Maintenance

Tab

Setting Up

Fine Tuning

Preparation
≥Press [VHS].

Tuning

: access

ENTER

: return

RETURN

: select

Pos Name

Pos Name

1

ARD 04

6 -

-

-

- -

2

ZDF 02

7 -

-

-

- -

3

N3 05

8 -

-

-

- -

4

HR3 08

9 -

-

-

- -

5

BR3 10

10 -

-

-

- -

: auto

ENTER

: return

RETURN

: select

Pos

: 1

Name :

ARD

Channel

: 4

Fine tuning

:

AUTO

Decoder :

OFF

Video system : AUTO

Audio mode

: BG

Mono :

OFF

VHS

75VGN.book 50 ページ 2004年7月21日 水曜日 午前11時54分

Advertising