Panasonic DIGA DMR-E75V - Manual (Page 57)

Advanced Operations
57
You can delete a cassette contents all at once.
Preparation
≥Press [VHS].
≥Insert a recorded video cassette.
[1] Insert a cassette that you want to delete the
cassette contents.
[2] While stopped,
Press [FUNCTIONS] to display the VHS
FUNCTIONS on the screen.
[3] Press [ 3, 4] to select the “QUICK ERASE”, and
then press the [ENTER].
[4] Press [ENTER] for 5 seconds or more to start
the QUICK ERASE function.
≥QUICK ERASE
function takes
approximately
30 minutes.
(with E-180 cassette)
∫ To stop partway
Press [ ∫, STOP].
The tape is rewound to the beginning, and it is fast-forwarded with
the quick erase function.
When the tape reaches the end, the VHS automatically rewinds it to
the beginning.
Note
≥When a video cassette with a broken off erasure prevention tab is
inserted, this function is not activated.
Press [AUDIO] to select the audio type.
The audio changes as follows:
L R (Stereo)
> L – > – R > – – (Normal audio track) >
L R (Stereo)
Note
≥You cannot change the audio while you use “DC” channel (
l 61).
To see these displays, set the “OSD” item in the “VHS FUNCTIONS”
to “4:3” or “WIDE” (
l 56).
Press [STATUS].
The following screen appears.
Note
≥These displays do not appear during special playback.
≥The on-screen display may be distorted depending on the playback
tape or the input signal.
QUICK ERASE
Changing audio
VHS FUNCTIONS
: access ENTER
: return RETURN
: select
Timer recording
QUICK ERASE
Tape length : AUTO ( E - 240)
PB Colour system : AUTO
SQPB : AUTO
OSD : 4 : 3
: cancel STOP
: press for 5 seconds ENTER
Various indications in on-screen display
1 VHS Indication
2 Input channel
3 Audio type
Show the selected audio type
4 L and R indicators
The Left (L) and Right (R) indicators show which sound mode
is selected as follows:
L R (Stereo): Both the L and R indicators appear.
L –:
The L indicator appears.
– R: The R indicator appears.
– – (Normal): Neither the L nor R indicator appears.
5 Tape speed or rec mode
6 Tape running display
Pressing [STATUS] once makes the on-screen display
appears. After that, press the button repeatedly to change
the display as follows:
Current time
>Operation status and Tape
counter >Remaining tape time>Current time
during Index search: “01” to “20” is displayed.
during Jet Rewind:
“ 6 JET REW” is displayed.
≥Press [¢, CANCEL/RESET] to reset the tape counter
(elapsed time) to “0:00.00”.
The tape counter is automatically reset to “0:00.00” when
inserting a video cassette.
≥The remaining time is approximate. It will be incorrect if you
set the wrong tape time in the “Tape length” item in the
“VHS FUNCTIONS” menu and if the tape is of poor quality.
M1/M2 1 ARD
VHS
1 3 2
SP L R
5 4
0:00.22 6
VHS
75VGN.book 57 ページ ２００４年７月２１日 水曜日 午前１１時５４分