The unit’s display, Before use – Panasonic DIGA DMR-E75V User Manual

Page 8

Advertising
background image

Before Use

8

Common to DVD/VHS

[A] Main display

≥Current time
≥VHS recording and play counter
≥Miscellaneous messages, etc.

[B] Dubbing direction indicator
[C] Main display

≥Current time
≥Disc recording and play counter
≥Miscellaneous messages, etc.

VHS
(1) Tape speed indicator (

l 53)

≥SP: When recording or playing in the Normal mode.
≥LP: When playing in the Long play mode.
≥EP: When recording or playing in the Extra long play mode.

(2) VHS output indicator
(3) External link indicator (

l 53)

On:
When a linked timer recording with external device is in standby
mode, or being performed.

(4) S-VHS dubbing indicator (

l 58)

When performing S-VHS dubbing.

(5) Remaining tape time indicator
(6) Tape operation status

≥The operation status of this unit, such as playback fast

forward, etc.

(7) Channel indicator
(8) Timer programme display (

) (

l 54)

On:
When a programme for timer recording is in standby mode, or
being performed.
Flashes:
When there are less than 10 minutes to go before timer
recording is programmed, but the unit is not on standby.

(9) Tape indicator

DVD
(1) Disc operation status
(2) Disc type
(3) External link indicator (

l 25)

On:
When a linked timer recording with external device is in standby
mode, or being performed.

(4) DVD output indicator
(5) Recording mode (

l 24)

≥XP SP LP EP (all on): FR mode (

l 24)

(6) Disc indicator
(7) Timer programme display (

) (

l 26)

On:
When a programme for timer recording is in standby mode, or
being performed.
Flashes:
When there are less than 10 minutes to go before timer
recording is programmed, but the unit is not on standby.

(8) Channel position indicator

TRK:

track number

GRP:

group number

TTL:

title number

CHP:

chapter number

PL:

play list number

Note
≥A half mirror is used for the unit’s display so the display may

occasionally be difficult to see depending on surrounding
conditions.

≥If “FL Display” is set to “Automatic” (

l 45) or “Power Save” is set to

“On” (

l 43), the unit’s display will not light up in standby mode.

Also, in addition to the aforementioned conditions, if the power is

off and the unit is in timer recording standby mode, only

lights

up in the display.

The unit’s display

75VGN.book 8 ページ 2004年7月21日 水曜日 午前11時54分

Advertising