Polycom SpectraLink 1725-36203-001 - Manual (Page 11)

Getting Started with Your SpectraLink 8020/8030 Wireless Telephone
1725-36203-001-F.doc 11
Take care not to short the battery contacts on the Battery Pack
with metal objects such as coins, keys or paper clips. Shorting
the contacts can cause permanent damage.
Battery Pack removal and replacement
To remove, press down on the latch on the Battery Pack on the back of
the handset. The Battery Pack releases outward.
To replace, slide the lip of the Battery Pack into the bottom of the
cavity. Push the top of the Battery Pack until it snaps into place. You
should not have to force it against the handset.
Notes on Battery Packs
• Battery Pack life will vary depending on handset model and
features and system infrastructure.
• Maximum Battery Pack performance is achieved after a few
charge/discharge cycles.
• If multiple Battery Packs are supplied with your handset, Polycom
recommends that each be fully charged upon receipt to prolong
battery life. Battery Packs will slowly lose charge if unused. To
maintain battery potential, charge unused Battery Packs occasion-
ally or alternate Battery Pack use.
• After a length of time Battery Packs will lose the ability to
maintain a charge and to perform at maximum capacity and will
need to be replaced. This is normal for all batteries.
• If your Battery Pack requires replacement, contact your system
administrator.
• Overnight charging is best done while the handset is turned off.
• The handset will chirp once when properly seated in the charger
to let you know that the charging cycle has begun. If the handset
does not charge, clean Battery Pack, charger and handset contacts
with an alcohol swab.
Only use SpectraLink Battery Packs with SpectraLink
8020/8030 Wireless Telephones.