Polycom SpectraLink 1725-36203-001 - Manual (Page 26)

User Guide: SpectraLink 8020/8030 Wireless Telephone with SRP
26 1725-36203-001-F.doc
Ring Settings
The Ring Settings option allows the user to set the ring for three
separate functions.
Telephone Ring is used for usual telephony
functions. Message Alert 1 and Message Alert 2 may be used to set
different ringing patterns for custom applications.
Telephone Ring
The telephone ring setting allows the user to set a distinctive ring
rhythm, tone, volume and sequence. Select from an audible ring, a
vibrate-only ring or a vibrate ring accompanied by an audible ring.
Ring Cadence The ring cadence is the rhythm of the ring. It may be
set to a pre-programmed ring cadence, or it may be set to obtain its
cadence from the SIP proxy server. The PBX option is designed to
utilize any distinctive rings sent by the proxy server while allowing
the user to set unique rings for auxiliary applications.
Off : Silent
PBX : The PBX, also known as the SIP call server, determines ring
cadence (e.g. the call server may send rings that differentiate
between internal and external calls)
Continuous : Rings continually until answered
Short Pulse : Rings in short bursts
Long Pulse : Rings in long bursts
Ring Tone Scroll and select from ten available tones. The Play softkey
allows the user to preview the tone before selecting. If Ring Cadence
is turned off, the Ring Tone option will not appear on the menu.
Ring Volume Use the Nav ef keys to change the Ring Volume
setting, or press the up/down volume buttons on the side of the
handset during ringing. If Ring Cadence is turned off, the Ring
Volume option will not appear on the menu.
Vibrate Cadence Vibrate Cadence options are the same as for Ring
Cadence (see above).
Ring Delay Ring Delay determines how long the vibrate cadence will
play before the audible ring starts. If Ring Cadence is turned off, the
Ring Delay option will not appear on the menu.