Turn the handset on, Turn the handset off, Lock the keypad – Polycom SpectraLink 1725-36203-001 User Manual
Page 34: Unlock the keypad, Place a call, Place an emergency call
User Guide: SpectraLink 8020/8030 Wireless Telephone with SRP
34
1725-36203-001-F.doc
•
Open the Config menu
•
Turn on the backlight
Turn the Handset On
Press and hold the
END
key until two chirps sound.
Turn the Handset Off
Press and hold the
END
key. One chirp will sound. If you are in a call,
hang up first, then turn off the handset.
Lock the Keypad
While in standby mode press the
Lock
softkey.
Unlock the Keypad
Press the
Unlk
softkey, then #.
Place a Call
1. To dial a number, follow any one of these sequences:
»
Press the
START
key, wait for a dial tone, then dial the number.
»
[Predial] Dial the number and then press the
START
key.
»
Press the
Spkr
softkey, then dial the number.
2. Listen for the ring to indicate the alerting of the called party.
Note:
Line 1
is the default line
Place an Emergency Call
(SpectraLink 8030 Wireless Telephone only)
The large button on the left side of the SpectraLink 8030 Wireless
Telephone may provide you with either Emergency Dial or PTT as
determined and activated by the system administrator.