Polycom SpectraLink 1725-36203-001 - Manual (Page 24)

User Guide: SpectraLink 8020/8030 Wireless Telephone with SRP
24 1725-36203-001-F.doc
Default settings
The profile options on the Config menu may be reset to their default
values by the system administrator. These are the default settings:
Setting/profile Silent Vibrate Soft Loud Custom
Ring Cadence Off Off PBX PBX PBX
Ring Tone Tone 1 Tone 1 Tone 1 Tone 1 Tone 1
Ring Volume 1 1 3 7 5
Vibrate Cadence Off PBX Off Off PBX
Ring Delay 0 0 0 0 5
Noise Mode Normal Normal Normal Normal Normal
Headset/Speaker Speaker Speaker Speaker Speaker Speaker
Key Tones Off Off On On On
Warning Tones Off Off Off Off Off
Push-to-talk * Off Off On On On
PTT Vibrate † Disabled Disabled Disabled Disabled Disabled
Emergency Dial ‡ On On On On On
* (8030 only) Push-to-talk must be enabled by the system administrator before it can be activated by the user. If it is not enabled,
then it will not appear on the Config menu and will not be “On” for any profile.
† PTT Vibrate is available only when Push-to-talk has been enabled by the system administrator.
‡ Emergency Dial must be enabled by the system administrator. If enabled, it will be “On” (or available for use) in every profile.