Polycom SpectraLink 1725-36203-001 - Manual (Page 56)

User Guide: SpectraLink 8020/8030 Wireless Telephone with SRP
56 1725-36203-001-F.doc
• The following products should NOT be used on the SpectraLink
wireless telephones.
— Do not use cleaning products containing quaternary
ammonium compounds,
2 such as CaviWipes™, CaviWipes™
XL, Cavicide® or Sani-Wipes®, Sani-Cloth, Super Sani-Cloth®
and Sani-Cloth® Plus. Quaternary ammonium compounds
have been laboratory tested and proven to damage the
handset plastics.
— Do not use furniture polishes, waxes or plasticizer based
cleaner (ArmorAll®, etc.)
— Do not use lanolin, aloe, glycerin or other skin care type
products
— Do not apply any solvent such as acetone, mineral spirits etc.
• Should the headset connector become dirty, a scratchy or
intermittent signal may be experienced. To clean the connector,
dip the non-padded end of either a wooden or paper handled
cotton swab in isopropyl alcohol. Gently insert in the connector
and twist, repeating several times. If available, blow compressed
air into the connector to clear debris.
• Keep the headset jack covered when it is not in-use.
• Using a carrying case may help protect the surfaces and help
prevent liquids (e.g., rain) from entering into the interior of the
handset. This product is not waterproof, and exposing the unit to
liquids may result in permanent damage to the unit.
If your wireless telephone interior gets wet, then do not try to
accelerate drying with the use of an oven or a dryer as this will
damage the wireless telephone and void the warranty. Instead, do the
following:
1. Immediately power off the wireless telephone.
2. Remove Battery Pack from wireless telephone.
3. Shake excess liquid from the wireless telephone.
4. Place the wireless telephone and Battery Pack in an area that is at
room temperature and has good airflow.
5. Let the wireless telephone and Battery Pack dry for 72 hours
before reconnecting the Battery Pack and/or powering on the
wireless telephone.
2 Quaternary ammonium compounds are also known as C12-18-alkyl [(ethylphenyl) methyl] dimethyl, chlorides and Benzyl-C12-
18-alkyldimethyl ammonium chlorides. Review the Materials Safety Data Sheet for your specific product to verify the chemical
composition.