Perle Systems IOLINK-PRO IOLINK-520 - Manual (Page 60)

Event Logs
IOLINK-PRO & 520 Reference Manual — A.17
* No ISDN line available for remote site <remote site alias>
All ISDN lines are currently in use; none are available for the new connection requested. May be generated when
CMCP is enabled and more ISDN calls are attempted than there are available ISDN lines.
* No ISDN resource available for remote site <remote site alias>
All ISDN lines are currently in use; none are available for the new connection requested. May be generated when
CMCP is enabled and more ISDN calls are attempted than there are available ISDN lines.
* No link number configured for remote site <remote site alias>
A remote site with a frame relay or leased line connection must have a link number assigned to it. If this messaage
appears, re-edit the remote site connection set-up to assign a link.
* No remote site available
The remote site table is full, there is no space available to create a remote site profile for this ISDN number or IP
address. The user must manually edit the table to remove some remote site profiles before another entry can be made.
* Old download method! Load in \”*.all\” file
Generated when an attempt is made to load a *.fcs or *.lda format program file into hardware which will only accept
*.all format code.
* Old format configuration, using default
Generated when the saved configuration does not match the expected correct revision number. The old
configuration formats will not be used.
* Outgoing call number X too long
Generated when an outgoing call has been attempted in which the number of dialed digits exceeds the limit.
* POP2/POP3 server added to firewall
The IP address of the POP2/POP3 server added to the table of services available through the firewall.
* POP2/POP3 server removed from firewall
The IP address of the POP2/POP3 server removed from the table of services available through the firewall.
* Remote Site <remote site alias> already active
Generated when a connection is attempted to a remote site that is busy.
* Remote Site <remote site alias> already connected
Generated when a connection is attempted to a site that is already connected to this router.
* Remote site <remote site alias> connected
Generated when the specified remote site has been connected for connection management.
* Remote site <remote site alias> down
Generated when the remote site configured for frame relay has gone down due to failure of security tests.