Panasonic DMR-EH75V - Manual (Page 38)

38
RQT8346
Utilizing the TV Guide On Screen ® system
Refer to the control reference on page 32.
When “SETUP” is selected in step 3 on page 35
SETUP screen is displayed.
The SETUP service allows you to redo the channel settings,
customize the channel line-up and set the TV Guide On Screen
®
system’s start-up pattern.
You can verify any information entered during setup, or completely
redo the setup, for the TV Guide On Screen
® system.
[1] Press [ 3, 4] to select “Change system settings” and then
press [ENTER].
The information that was set is displayed, and you are asked to
confirm whether it is correct.
[2] Press [ 3, 4] to select the message and then press [ENTER].
≥“Yes, everything is correct”
- The information that was set will remain intact.
Press [ 3, 4, 2, 1] to select “Next” and then press [ENTER]
to exit the screen.
≥“Yes, but my channel lineup is incorrect”
1 Press [ 3, 4, 2, 1] to select one of the following channel
lineups and then press [ENTER].
2 Press [ 3, 4, 2, 1] to select “Next” and then press
[ENTER].
Then follow the operation instructions given on screen.
≥“No, repeat setup process”
- The TV Guide On Screen ® system setup screen is displayed.
Follow the on-screen prompts to redo the setup ( l 23,
step 4).
You can customize the channel line-up. You can easily change
channel line-up should the cable company occasionally revise their
channel assignments.
[1] Press [ 3, 4] to select “Change channel display” and then
press [ENTER].
[2] Press [ 3, 4] to select the channel to customize and then
press [ENTER].
Grid Options menu is displayed.
Items that can be set up differ depending on the situation.
[3] Press [ 3, 4] to select the item and then press [2, 1] or the
numbered buttons to change the setting.
Grid Options
You can change the size of the Information box etc., scheduled
recording, and scheduled reminder default settings.
[1] Press [ 3, 4] to select “Change default options” and then
press [ENTER].
[2] Press [ 3, 4] to select the option and then press [ENTER].
Items for each option are displayed ( l 39).
[3] Press [ 3, 4] to select the item and then press [2, 1] or the
numbered buttons to change the setting.
[4] Press [ 3, 4] to select “done” and then press [ENTER].
Using SETUP Service to change the
settings of the TV Guide On Screen
®
system
∫ Access to the TV Guide On Screen ®
system setup screen–“Change system
settings”
∫ Customizing the channel lineup –“Change
channel display”
SCHEDULE SEARCH
Change system settings
Change channel display
Change default options
Display setup progress
SETUP
SETUP
INFO
Change system settings
(
l below)
Change channel display
(
l below)
Change default options
(
l right)
Display setup progress
(
l 39)
Yes, everything is correct
Yes, but my channel lineup is incorrect
No, repeat setup process
Are the above settings correct?
ZIP Code - 11111 (USA)
Cable on "RF"
pTV
TV
NWBG
5
12
PTV-S
TV-TR Cable
NWBG 2
Cable
Cable
2
1
3
CHANNEL EDITOR
ON
ON
ON
CHANNEL
EDITOR
screen
position: Change the position where the channel appears
in the LISTINGS screen (and CHANNEL
EDITOR)
channel: On: Channel is always displayed in
LISTINGS and SEARCH screen
Off: Channel is never displayed in
LISTINGS and SEARCH screen
auto-hide: Display a channel only when program
information is available
service: Change the service for a channel if there is more
than one service available (e.g., cable, over-the-
air, antenna, DirecTV, etc.)
input: Change the input for the channel if there is more
than one input (e.g., Antenna 1, Antenna 2, etc.)
tune channel: Correct the tune channel number using the
remote
re-sort
numerically: Change the channel order in the LISTINGS
screen (and CHANNEL EDITOR) to numeric
undo all
changes: Reset all channel editor options (and LISTINGS
screen) to their original settings
∫ Change the initial settings–“Change
default options”
Grid Options
position
on channel
go back to Setup
re-sort numerically
undo all changes
done
cancel
1
2
SCHEDULE SEARCH
General defaults
Record defaults
Remind defaults
Go back to Setup
SETUP
SETUP: CHANGE DEFAULT OPTIONS
Options
M6740P.book 38 ページ ２００６年１月３０日 月曜日 午後３時３０分