Panasonic DMR-EH75V - Manual (Page 76)

76
RQT8346
Changing the unit’s settings
Tabs Menus Options (Underlined items are the factory presets.)
Audio Dynamic Range Compression [DVD-V] (Dolby Digital only)
Change the dynamic range for late night viewing.
≥On ≥Off
Multi-channel TV Sound (MTS)
Select whether to record the main or secondary (SAP) audio
type when:
≥Recording to a DVD-R, DVD-R DL, DVD-RW (DVD-Video
format), +R, +R DL and +RW.
≥When “Recording for High-Speed Copying” is set to “On”.
≥Recording or copying sound in LPCM. (
l below, Audio for XP
Recording).
≥Main ≥Secondary Audio Program (SAP)
You cannot select the audio on this unit when recording from an
external source, such as when copying from a video cassette
recorder (except from DV equipment connected to this unit’s
DV input terminal). Select on the other equipment.
Digital Audio Output
Change the settings when you have connected equipment through this unit’s DIGITAL AUDIO OUT terminal (
l 21).
≥Press [ENTER] to show the following settings.
PCM Down Conversion
Select how to output audio with a sampling frequency of
96 kHz or 88.2 kHz.
≥Signals are converted to 48 kHz or 44.1 kHz despite the
settings across if the signals have a sampling frequency
of over 96 kHz or 88.2 kHz, or the disc has copy
protection.
≥On: Signals are converted to 48 kHz or 44.1 kHz. (Choose
when the connected equipment cannot process signals
with sampling frequency of 96 kHz or 88.2 kHz.)
≥Off: Signals are output as 96 kHz or 88.2 kHz. (Choose when
the connected equipment can process signals with
sampling frequency of 96 kHz or 88.2 kHz.)
Dolby Digital Select how to output the signal. If
“Bitstream” is selected, the connected
equipment decodes the signal.
If “PCM” is selected, this unit decodes
the signal and output it as 2 channel.
Note
Not making the proper settings may
result in noise, or some trouble for
digital recording. ≥Bitstream: When connecting to equipment displaying the
Dolby Digital logo.
≥PCM: When connecting to equipment not displaying the
Dolby Digital logo.
DTS ≥Bitstream: When connecting to equipment displaying the DTS
logo.
≥PCM: When connecting to equipment not displaying the
DTS logo.
Audio for XP Recording
Choose the audio type when recording or copying with XP
mode. ≥Dolby Digital ( l 93)
≥LPCM ( l 93)
- The picture quality of LPCM recordings may be lower than
that of normal XP mode recordings.
- The audio recording becomes Dolby Digital even if you
selected LPCM when using a recording mode other than XP.
- When recording a MTS broadcast, select the type of audio in
advance from “Multi-channel TV Sound (MTS)” ( l above).
Select Audio Channel for DV Input
You can select the kind of audio when recording from the unit’s
DV terminal (
l 68).
≥Stereo 1: Records audio (L1, R1).
≥Stereo 2: Records added audio such as narration (L2, R2)
subsequent to original recording.
≥Mix: Records both Stereo 1 and Stereo 2.
[-R] [-RW‹V›] [+R] [+RW]
When recording a MTS broadcast, select the type of audio in
advance from “Multi-channel TV Sound (MTS)” (
l above).
Display Status Messages
Choose whether to show status messages automatically. ≥Automatic ≥Off
On-screen Language
Choose the language for these menus and on-screen
messages. ≥English ≥Español ≥Français
- Only English is displayed in the TV Guide On Screen ®
system regardless of the settings. Other languages cannot
be displayed.
Blue Background
Select “Off” if you do not want to have the unit show the blue
background when reception is weak. ≥On ≥Off
FL Display
Changes the brightness of the unit’s display.
≥The power indicator goes off when you set “FL Display” to
“Dim” or Automatic”.
≥Bright ≥Dim
≥Automatic:
The display turns dark during play, and reappears
momentarily if a button is pressed. When the unit is turned off
all displays disappear. While using this mode the standby
power consumption can be reduced.
M6740P.book 76 ページ ２００６年１月３０日 月曜日 午後３時３０分