Panasonic AW-SW350E - Manual (Page 15)

27 (E)
ENGLISH
26 (E)
■ OPERATION METHOD
This section describes how to operate the application programme used with the USB
image transfer programme for the AW-SW350.
Connect the host computer to the AW-SW350.
(Check that the AW-SW350's power is on.)
The main screen shown in Fig.9 appears when the application programme used with
the USB image transfer programme for the AW-SW350 is started up.
When the “Open File” button is clicked, the file selection dialogue box shown in Fig.10
appears. Select the image file (BMP, JPG or JPEG) to be transferred, and click “OK”.
3
2
1
The installer programme shown in Fig.7 now starts. Proceed with the installation by
following the installer instructions.
This completes the installation of the application programme.
6
5
Fig.8 Application programme installation completion screen
Fig.7 Application programme installer start screen
Fig.9 Application programme main screen
Fig.10 File selection dialogue box