Panasonic KX-BP800 - Manual (Page 26)

26
Before Using the Interactive Function
■ Connecting to the PC
■ System requirements
Interactive Board
Interactive Cable
To the PC
(communication port)
Tray
Interactive
Connector
1 Connect one end of the proprietary interactive
cable supplied to the interactive connector
under the tray and the other end to the
computer's communication (COM) port.
C Be sure to turn off the electronic print board
and PC before you connect or take off the
interactive cable.
2 After connecting the interactive cable, securely
tighten the screws on the connector.
Computer: IBM ® PC/AT or compatible machine with CD-ROM drive
CPU: Pentium ® 150MHz or higher processor
Port: 9-pin communication (COM) port
Operating System: Windows ® 95, Windows ® 98, Windows ® Millennium Edition,
Windows NT ® 4.0 or Windows ® 2000
Memory: 32MB or higher
Hard Disk Space: At least 10MB free space
Note
This cable is a proprietary interactive cable for
connecting the electronic print board with
a PC.
Please do not use it with any other products.
Note