Panasonic KX-BP800 - Manual (Page 73)

Installation
73
Assembling the Print Board
■ Assembly
•
Film cassette . . . . . . . . . . . . . . . . . . . . . . . . . 1
•
Blue gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
•
Green gears . . . . . . . . . . . . . . . . . . . . . . . . . . 3
•
Thermal transfer film [20m (65.6')] . . . . . . . 1
•
Markers (Black, Red, Blue-Big) . . . . . . .Each 1
•
Eraser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
•
Letter papers . . . . . . . . . . . . . . . . . . . 20 sheets
•
Pen holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
•
Markers for interactive
(Black, Red, Blue, Green-Small) . . . . . .Each 1
•
Electronic eraser . . . . . . . . . . . . . . . . . . . . . . .1
•
Eraser cloth (for electronic eraser) . . . . . . . . .2
•
Batteries (LR03 "AAA") . . . . . . . . . . . . . . . . . .6
•
Power cord . . . . . . . . . . . . . . . . . . . . . . . . . . .1
•
Interactive cable (5m) . . . . . . . . . . . . . . . . . . .1
•
Software CD-ROM . . . . . . . . . . . . . . . . . . . . . .1
•
Operating Instructions . . . . . . . . . . . . . . . . . . .1
•
Software License Agreement . . . . . . . . . . . . . .1
•
Wall-mounting template. . . . . . . . . . . . . . . . . .1
•
Warranty card . . . . . . . . . . . . . . . . . . . . . . . . .1
1
Assembly of the optional stand or wall-mounting kit.
■ If you are using a stand, refer to page 78.
■ If you are using a wall-mounting kit, refer to page 81.
2
Remove the print board from the shipping box.
Remove the joints, then remove the print board from the shipping box.
C Do not touch the screen film surface as doing so may damage it.
C The shipping box, cushioning material, and other packaging materials will be necessary if
you ever need to repackage the print board, so do not throw them away.
Note