Panasonic KX-BP800 - Manual (Page 75)

Installation
75
Assembling the Print Board
4
Attach the power cord.
1. Securely fit the supplied power
cord into the AC inlet on the
printer unit.
2. Fit the power cord into the cord
holder. Do not force it.
C
Do not use thinner, benzine or cleaners
containing abrasives as this may result in
discoloration.
C
Do not wipe the screen film with a dry
cloth as this may generate a static
charge.
5
Wipe the screen film surface.
Wipe the screen film gently with a
water-dampened cloth that has
been thoroughly wrung.
6
Check operations.
Refer to page 76 "Print Board
Operations Check".
Power Cord
AC Inlet
Cord Holder
Note