Panasonic KX-BP800 - Manual (Page 30)

30
Using the Interactive Panaboard Software
■ Pop-up menu configuration of the Interactive Panaboard Software
■ Switching the mode
Right-click the in the Taskbar to get the pop-up menu.
Following operations are possible in the pop-up menu.
Select Mode... : Allow you to switch between modes (Projector mode/ Whiteboard mode).
Calibrate : Execute the calibration. (Projector mode only) ➡ Page 33
Tool Draw : Display the Desktop Drawing Tool. (Projector mode only) ➡ Page 36
View Window : Display the View window. (Projector mode only) ➡ Page 42
Open/Close
Whiteboard window : Switch the Whiteboard window open/close. (Whiteboard mode only) ➡ Page 45
Settings COM Port... : Set the communication port.
Adjustment... : Adjust the position of the Electronic Pen or the Electronic Eraser to
improve the shifted position.
Options... : Set the option of the Interactive Panaboard Software.
Help Topics... : Display the help of the Interactive Panaboard Software.
About... : Display the Interactive Panaboard Software version information.
Exit : Exit the Interactive Panaboard Software.
You can freely switch the Projector mode and the Whiteboard mode while the
Interactive Panaboard Software is running.
■ Settings of the Interactive Panaboard Software
C
COM port
Setup the communication port to communicate with the Interactive Panaboard.
1
Right-click the icon in the Taskbar and click [Select Mode...] in
the pop-up menu. In addition, you can double-click the icon in
the Taskbar.
C
The Select Mode dialog box will appear.
(1) Right-click the icon in the Taskbar and click [Settings] · [COM
port...] in the pop-up menu.
C
The COM port dialog box will appear.
(2) Click the [Start...] button of the Auto Detection to detect the communication port
connected with the Interactive Panaboard automatically.
Otherwise, click the arrow at the bottom on the right side of the [COM port] box and then
click the communication port from the list.
(3) Click the [OK] button.
2 Click either the [Projector] button or the [Whiteboard] button, and then click the [OK] button.
C When switching to the Projector mode, the calibration screen will not be displayed automatically
after calibration ended correctly once. Please calibrate if necessary.
C
When switching to the Whiteboard mode, the Whiteboard window will be displayed.