Panasonic DP-7000 - Manual (Page 29)

7
1
1-2 Switching On and Off
Getting to Know Your Copier
1
If the machine is switched On but
has been left unused for a fixed
period of time, the Power Saver
feature will reduce the power
consumption of the machine to
conserve energy. See
1-5: Saving
Power for details.
When the Auto Start feature is
activated, "Please wait ... Job will
start automatically." appears on the
message area of the display. The
indicator light at the top left corner of
the Auto indicator is lit.
You can cancel the Auto Start
feature by pressing the Stop button
and then the Clear C button.
This feature is available for models
with only the copy function. See
Time-Outs in 6-1: List of Custom
Preset Functions
on how to change
the settings.
The Auto Power Off feature is not
available for models with the printer
feature.
Switching Off the Power Automatically
The Auto Power Off feature will be enabled if the machine has been left
unused for a certain duration (factory default is 60 minutes) while the power
is On.
Press the switch to the " " position to switch On the power.
Auto Start
Load the document while the message "Please wait.." is being displayed.
Then press the Start button. The document will automatically be scanned
once the machine is ready to copy. This is called the Auto Start feature.
Turn the power switch to the " "
position.
The power is switched Off.
Switching Off the Power