Panasonic DP-7000 - Manual (Page 49)

2-4 Changing the Paper Tray Size 27
Loading Paper
2
Changing the Size of Trays 2 to 4
Request assistance from your System Administrator if you need to change
the size of Trays 2 to 4. Your System Administrator can follow the
procedures shown below to make the changes.
Procedure
Pull out the tray that you
want to change until it
stops.
When pulling out a
paper tray, do it
slowly. If pulled out
with too much force,
the tray can hit and
injure your knees.
Remove any paper still in
the tray.
Use a screwdriver to
remove the three screws
as shown in the diagram.
After changing paper size, follow the
steps from Step 9 to adjust settings
on the Tools Mode screen.