Panasonic DP-7000 - Manual (Page 71)

4-4 Reducing/Enlarging the Length and Width (Independent X-Y%) 49
Basic Features
4
Reducing/Enlarging the
Length and Width
(Independent X-Y%)
The Independent X-Y% feature allows you to make copies with independent
length or width of the original. There are three methods available.
Specifying X/Y Percentage Change (Variable X-Y%)
You can make copies of
the originals by
selecting different ratios
for X and Y. The image
will be copied according
to your selected values.
Specifying Original/Copy Size (Calculator %)
Copies will be made
based on the ratios
calculated by the
machine from the input
measurements of the
document and the
desired copy.
Automatic X/Y Percentage Change (Auto-Fit)
The machine will make
copies of the originals
by calculating the X and
Y ratios so that the
image can fit onto the
selected paper size.
Y
X
You can enter a length (Y) between
1-999 mm in 1 mm increment.
The machine will automatically
adjust the ratio to 25% if the
calculated ratio is below 25%, and
400% if the calculated ratio is above
400%.
If you have also selected Auto
Center (Centre) for Image Shift,
then the image will be copied onto
the center of the paper as shown in
the diagram on the right.
You can select a ratio between 25-
400% in 1% increments.
When this is selected with Image
Rotation Off, the resulting output
will be as illustrated on the right.