Changing the paper tray size, Changing the size of tray 1 – Panasonic DP-7000 User Manual
Page 47
2-4 Changing the Paper Tray Size
25
2
Follow the procedures shown below to change the size of Tray 1 in order to
load paper stock of the desired size.
For changing paper size A5
5.5 x 8.5", you have to do it via the Tools
Mode screen.
Procedure
Pull Tray 1 out until it
stops.
When pulling out a
paper tray, do it
slowly. If pulled out
with too much force,
the tray can hit and
injure your knees.
Remove any paper still in
the tray.
Pinch and hold the release
on the Lever as shown in
the diagram. Then push
the Lever to the rear of the
tray.
2.1 What Paper to Use
for
information on the types of paper
stock that can be used.
Original/Paper Size Sensing
of
6.1:
List of Custom Preset Functions
for
information on the Tools Mode
screen.
Changing the Paper Tray Size
Paper jam may occur if the paper
size has not been changed correctly.
Changing the Size of Tray 1