Precor C932 User Manual
Page 25
page 25
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Press SELECT once again and the Error Log appears. The most recent error log
appears first and scrolls across the display. If the words, NO ERRORS appear, no
errors have been recorded.
Up to ten error codes can be recorded and viewed in the following format.
1: ER33 AT 12,345,678 MILES 1,714 HOURS
Error code
Most recent error
Odometer reading at the time the error occurred
The number of hours that the treadmill has been
in use when the error occurred
Note: To clear (delete) the error log, press the QuickStart key for at least four
seconds while the message HOLD QUICKSTART TO CLEAR ERROR LOG scrolls
across the display. If the QuickStart key is released before the message finishes
scrolling, then the display returns to the previous error code. If you continue to press
the QuickStart key until the message finishes scrolling, then prompts appear on the
display and let you know when the error messages have been deleted from memory.
Important: You cannot retrieve the error log once you have deleted it.
To return to the PRECOR banner, press RESET, SELECT, or the red Stop button.